产品型号及结构 Type And Structure | 型号:MG635-216KL，保径齿及内排齿均为锥球齿，按一、二、三轮配套。 Type:MG635-216KL，Gauge/InnerRow:Conical Inserts With First，Second，Third Con |
安装说明 Assembly Instruction | 筒钻配安装的底座法兰盘，底座上有定位销孔及螺栓联结固定孔，钻头按一、二、三轮间断安装，安装方式 采用高强度螺栓固定及定位销固定，牙轮损坏时，只需要拆开联结螺栓，将钻头取下，然后更换一个新钻头。 The flange plate of the base is equipped with the fixed position pin hole and the bolt coupling fixed hole in the base. The roller bit is installed intermittently according to one,two and three rounds.The installation mode is fixed by two high strength bolts and fixed by the positioning pin，and when the roller bit is damaged,all you need to do is to remove the connecting bolt，to remove the bit，and to replace a new one. |
适用工况 Suitable Operating Mode | 适用于30-120MPa，如软到中硬的岩石桩;如中、强风化花岗岩、盐岩、片岩、硬石膏岩、砂岩、板岩、页岩、石灰岩等。 Suitable for 30-120 mpa，such as soft to medium hard rock piles,medium，strong weatheredgranite,salt rock, schist anhydrite,sandstone,slate，shale,limestone,etc. |
